Interior

Centre console — mechanism repair

Illustrated repair notes for the centre-console compartment mechanism. Original PDF is in German.

Illustrated repair notes for the centre-console compartment mechanism. Original PDF is in German.

English notes from the source guide
Step 1: Remove the tensioning-wheel cover (secured at six points; comes off easily).

Step 2: Open the compartment fully so the cables are under tension. Important.

Step 3: Mark the cable attachment position on the left wheel. Hold the wheel, unhook the cable, turn the wheel further to increase tension, then reconnect the cable.

If the wheel is accidentally released, the original guide notes that it had three turns of preload and was adjusted to five turns on both sides. This is an example from the original author's repair, not a manufacturer specification.

Step 4: Repeat the procedure on the opposite side, observing the correct direction of rotation. Tension the left and right sides evenly.

Step 5: Check that each cable is correctly hooked in and lies in the tensioning-wheel groove, not on the edge. Check that its end is properly seated.

Step 6: Check that the cable passes correctly over the guide pulley.

Step 7: Refit the cover and check the mechanism operates properly.

Source: original German-language centre-console repair PDF included with this website.